February 2022 15
Here's the parts list in no par cular order:
Canister Valve Removal Kit
This is a complete kit with extra hardware to
remove the en re canister system. This includes a
dongle to remove the canister valve and a choice
of two ways of plugging the line that runs from
the canister valve to the intake tract. Either use
the plas c thumb screw in the rubber line or go
directly to the head, remove the brass nipple and
use the 6mm bolt and copper washer.
h ps://www.ro weilerperformance.com/canis-
ter-valve-removal-kit/
O2 Sensor Eliminator
This plug lets you unplug the oxygen (O2) sensor
from the wiring harness to take the ECU out of
closed loop mode. This lets the bike run in the rpm
range of 13.2-13.5 AFR now, instead of the 14.7 area.
h ps://www.bestdualsportbikes.com/product-page/
o2-sensor-eliminator-for-2020-21-excf-xcfw-fe-
O2 Sensor Bung Plug This 12mm bung plugs the hole
in the head pipe when you remove the O2 sensor
from the head pipe on the 2020-2023 EXCF/XCFW/
FE and FE-S model bikes. You have to use the O2 sen-
sor eliminator to use this plug. It doesn't enter into
the pipe body, so it doesn't impede flow.
h ps://www.bestdualsportbikes.com/product-
page/12mm-o2-sensor-bung-plug-block-off
