22 Trail Rider www.TrailRider.com
Product Feature Product Feature
NITRO WEDGE NITRO WEDGE
Here's a new product from our friends at Nuet-
ech, the Nitro Wedge. Basically, the Nitro Wedge
is a sec on of a NitroMousse that can be used to
fine tune or install new life back into an old Nitro-
Mousse. Those familiar with the product are also
aware of the fact that a NitroMousse can shrink
over me, resul ng in a mushy feel. In some cas-
es, similar to a flat or extremely low pressure re.
Installa on is straigh orward. The old Nitro is cut
and placed in the re, pushing deeply into the re
carcass. If there is a gap, measure the distance
and simply cut a piece of the same length off the
Nitro Wedge to fill the gap. For those who wish to
increase the firmness of their Nitro, you can go a
li le bigger and stuff it into the re and squish the
Nitro foam to your desire. Some might ask why
one would put forth the effort when you can just
buy a new Nitro but not everyone has the budget
to spend 120 bucks or so when the ride can be
brought back to spec or even improved upon for
an investment of less than 20 bucks and a li le bit
of your me.
Nitro Wedge is offered to work with Pla num or
So NitroMousse and available in all NitroMousse
sizes.
Hats off to our friends at Nuetech for thinking of
the budget minded woods rider. Not everyone has
a factory expense account!
For more info, check out www.nitromousse.com
-Kurt
