January 2026 25
Basically, all that's required to install the Nihilo
fuel pump is to unclip the wiring harness from the
fuel pump and disconnect the fuel line at the quick
connector located next to the thro le body. Either
remove all the bolts securing the tank to the bike
or remove it en rely if you wish. The next step is to
remove the four 6 mm screws fastening the pump
to the tank, pull the pump, unclip the connector at
the top of the pump, and clip the wiring harness
from the Nihilo pump into the OEM pump con-
nectors. The next step is to fasten the Nihilo pump
hose to the OEM pump with the supplied zip es.
The Nihilo pump is then inserted into the lower-le
corner of the tank, ensuring the fuel line curvature
faces forward. The OEM pump is then reinstalled in
the exact loca on. Yes, it's that simple.
As for electrical requirements, the addi onal pump's
draw is minute, at only 189 milliamps, and will not
tax your stator output. As with the OEM pump, once
the engine starts, both pumps will run. If the Nihilo
pump were to fail, the OEM pump would s ll con n-
ue to run.
For more informa on, visit nihiloconcepts.com part
# SKU NCFTPK $199.99. In fact, our friends at Slavens
Racing are now a stocking dealer!
